Introduction Hi guys , in this article we will see how to interface MPU6050 accelerator with raspberry pi using python Language. Acclerometer reads the acceleration of the sensor. This module…
Introduction Hi guys, in this we will see how to read the present location from the GPS module and this location to the user from the GSM module as SMS.…
Introduction Hi guys, in this article we will see how to interface GSM Module with Raspberry pi and send SMS using python. Components Required Raspberry Pi (with OS installed SD…
MICROCONTROLLER Microprocessors and microcontrollers are widely used in embedded systems products. Microcontroller is a programmable device. A microcontroller has a CPU in addition to a fixed amount of RAM, ROM,…
Hi guys, this blog is about how to interface Panasonic PIR sensor with Arduino nano microcontroller. Prerequirements: Arduino Nano Panasonic PIR Sensor (EKMC1603111) Buzzer Resistor 15 kohm Breadboard Jumper Wires…
Introduction: Hi, in this article we will see how to send SMS with SIM800 GSM module using blue pill microcontroller in Keil IDE. SIM800 is a quad-band module 850/900/1800/1900MHz and…
Hi guys this article is to discuss the Lora module interfacing with the STM32F blue pill board. The driver is implemented to transmit and receive the data between two devices…
Hi guys, in this article we will discuss how to monitor the DHT sensor values in the Blynk application. For this we should have an account in the Blynk app,…
Hi guys, this article is to read the DHT sensor values temperature and humidity, these values are displayed on the PyQt5 GUI application. This GUI is designed in Qt designer…
Introduction: In this tutorial, I am going to explain about sending sensor values to the thing speak server. ThingSpeak is an open-source server, so users just need to sign up…