How to read from multiple channels of the ADC on a TMS320F28379D?

Devilal

3 years ago

Table of Contents

Toggle

Introduction

Analog to Digital Converters (ADC) translate Analog electrical signals for data processing purposes. With products matching performance, power, cost, and size needs, Analog Devices offers the industry’s largest A/D converter portfolio. As the world’s leading provider, these data converters enable accurate and reliable conversion performance in a range of applications such as communications, energy, healthcare, instrumentation and measurement, motor and power control, industrial automation, and aerospace/defence. A variety of A/D converter resources are provided to assist the engineer in every project phase, from product selection to circuit design.

Today in this tutorial, we will see how to read multiple channels in ADC in TMS320F28379D

For this demonstration, I am using TMS320F28379Dcontroller and CCS.

For the ADC purpose, I am using 3 channels as mentioned below:-

CHANNEL 0 –> Potentiometer
CHANNEL 2 –> Potentiometer
CHANNEL 4 –> Potentiometer

ADC Features

Each ADC has the following features:
Selectable resolution of 12 bits or 16 bits
Ratiometric external reference set by VREFHI and VREFLO pins
Differential signal conversions (16-bit mode only)
Single-ended signal conversions (12-bit mode only)
Input multiplexer with up to 16 channels (single-ended) or 8 channels (differential)
16 configurable SOCs
16 individually addressable result registers
Multiple trigger sources
- – S/W – software immediate start
- – All ePWMs – ADCSOC A or B
- – GPIO XINT2
- – CPU Timers 0/1/2 (from each C28x core present)
- – ADCINT1/2
Four flexible PIE interrupts
Burst mode
Four post-processing blocks, each with:
Saturating offset calibration
Error from setpoint calculation
High, low, and zero-crossing compare, with interrupt and ePWM trip capability
Trigger-to-sample delay capture

ADC parametric specification

Resolution

Sampling speed

Input channels

Interface

Precision and General Purpose ADC Finder

High-Speed ADC Finder

Final code

/*
 * mian.c
 *
 *  Created on: 26-Nov-2021
 *      Author: Admin
 */

#include <stdio.h>
#include <string.h>
#include <stdlib.h>

#include "F2837xD_device.h"
#include "F28x_Project.h"
#include "F2837xD_Examples.h"

#include "driverlib.h"
#include "device.h"

#define     EX_ADC_RESOLUTION       12

void ConfigADC(uint32_t ADC_BASE);
void initADC_SOC(void);

uint16_t Adc_Result_1,Adc_Result_2,Adc_Result_3;
float ADCINA0_1A,ADCINA4_1B,ADCINA2_1C;


void main(void)
{
    Device_init();
    Device_initGPIO();

    Interrupt_initModule();
    Interrupt_initVectorTable();

    ConfigADC(ADCA_BASE);
    initADC_SOC();
    EINT;
    ERTM;

    while(1)
    {
        // Convert, wait for completion, and store results
          ADC_forceSOC(ADCA_BASE, ADC_SOC_NUMBER0);
           ADC_forceSOC(ADCA_BASE, ADC_SOC_NUMBER2);
           ADC_forceSOC(ADCA_BASE, ADC_SOC_NUMBER4);

           while(ADC_getInterruptStatus(ADCA_BASE, ADC_INT_NUMBER1) == false)
               {

               }
           ADC_clearInterruptStatus(ADCA_BASE, ADC_INT_NUMBER1);

           ////           // Store results
           Adc_Result_1 = ADC_readResult(ADCARESULT_BASE, ADC_SOC_NUMBER0);
           Adc_Result_2 = ADC_readResult(ADCARESULT_BASE, ADC_SOC_NUMBER4);
           Adc_Result_3 = ADC_readResult(ADCARESULT_BASE, ADC_SOC_NUMBER2);

           // convert into voltage

//           ADCINA0_1A = Adc_Result_1*(3.3/4096);
//           ADCINA4_1B = Adc_Result_2*(3.3/4096);
//           ADCINA2_1C = Adc_Result_3*(3.3/4096);

           // convert these voltage levels into AMP

           ADCINA0_1A = (Adc_Result_1*(3.3/4096))*100;
          ADCINA4_1B = (Adc_Result_2*(3.3/4096))*100;
          ADCINA2_1C = (Adc_Result_3*(3.3/4096))*100;
    }
}


void ConfigADC(uint32_t ADC_BASE)
{
    EALLOW;

    ADC_setPrescaler(ADCA_BASE, ADC_CLK_DIV_4_0);

#if(EX_ADC_RESOLUTION == 12)
    {
        ADC_setMode(ADC_BASE, ADC_RESOLUTION_12BIT, ADC_MODE_SINGLE_ENDED);
    }
#elif(EX_ADC_RESOLUTION == 16)
    {
      ADC_setMode(ADCA_BASE, ADC_RESOLUTION_16BIT, ADC_MODE_DIFFERENTIAL);
    }
#endif
    ADC_setInterruptPulseMode(ADC_BASE, ADC_PULSE_END_OF_CONV);
    ADC_enableConverter(ADC_BASE);
    DEVICE_DELAY_US(1000);
    EDIS;
}




void initADC_SOC(void)
{
#if(EX_ADC_RESOLUTION == 12)
    {
        ADC_setupSOC(ADCA_BASE, ADC_SOC_NUMBER0, ADC_TRIGGER_SW_ONLY, ADC_CH_ADCIN0, 15);
        ADC_setupSOC(ADCA_BASE, ADC_SOC_NUMBER2, ADC_TRIGGER_SW_ONLY, ADC_CH_ADCIN2, 15);
        ADC_setupSOC(ADCA_BASE, ADC_SOC_NUMBER4, ADC_TRIGGER_SW_ONLY, ADC_CH_ADCIN4, 15);



    }
#elif(EX_ADC_RESOLUTION == 16)
    {
        ADC_setupSOC(ADCA_BASE, ADC_SOC_NUMBER0, ADC_TRIGGER_SW_ONLY, ADC_CH_ADCIN0,64);
    }
#endif
    ADC_setInterruptSource(ADCA_BASE, ADC_INT_NUMBER1, ADC_SOC_NUMBER0);
    ADC_setInterruptSource(ADCA_BASE, ADC_INT_NUMBER1, ADC_SOC_NUMBER2);
    ADC_setInterruptSource(ADCA_BASE, ADC_INT_NUMBER1, ADC_SOC_NUMBER4);


    ADC_enableInterrupt(ADCA_BASE, ADC_INT_NUMBER1);

    ADC_clearInterruptStatus(ADCA_BASE, ADC_INT_NUMBER1);


}

Click Here to Download Source Code